Fix Comctl32.dll Error

Sometimes it happens that when you try to start your system then suddenly you might have received an error message “WinLogon.exe could not locate component. This application has failed to start because comctl32.dll was not found. Re-installing the application may fix this problem” and you are unable to start windows. S This error message you receive when your Comctl32.dll file gets missing from your system. Due to this error you are unable to start program or an application which you have installed in your system. This error occurs similarly in all the versions of windows operating system.

What are the symptoms?

WinLogon.exe could not locate component. This application has failed to start because comctl32.dll was not found. Re-installing the application may fix this problem.
And when you click ok to clear this error message then you receive the following error message:
User Interface Failure. The logon user interface DLL 'msgina.dll' failed to load. Contact your system administrator or restore the DLL.

How to fix Comctl32.dll error?

Watch the given below manual steps to fix Comctl32.dll error:-

• Use the windows installation CD ROM to fix this error.
• Insert the windows installation CD ROM in CD/DVD drive and then restart your computer.
• When you are prompter with message saying Welcome to setup then press R key to start the Recovery Console.
• Select the installation if you have a dual boot or multi boot computer which you want to access from the Recovery Console.
• Type the administrator password if asked and then press enter. If condition administrator password is blank then press enter.
• EXPAND D:\I386\comctl32.dl_ C:\Windows\System32, type the commond line and then hit enter.
• Then restart the computer.

If you are unable to expand files then repair the windows XP installation and to do this operation follow the given below steps:-

• At the welcome setup screen you need to press to start windows XP Setup.
• Then read the End User License Agreement and then press F8 function key to accept and to continue.
• To repair the current installation press R key and follow the instructions which is displayed on your PC screen.
• If this error has badly affected your system then you have to uninstall your operating system and reinstall it again.

 But before this stage comes you just download third party repair tool to fix Comctl32.dll error. Now I can easily fix my PC by following given above instructions and now its your turn to fix your system and overcome from this issue.

How to fix BSOD error 0x00000023?

Windows problem or windows error has became common problem for system users. You might have received error 0x00000023 when you try to start windows. Actually this error occurs due when the FAT file stream driver is unable to recognize the two drivers in your system. FAT is the system file which provides a mapping between the logical storage and physical location of the hard drive data. If this file gets corrupted then you receive this BSOD error. This FAT file gets corrupt due to operating system that you have installed gets corrupted, improper shut down of your system.

What makes this error to occur?

Windows BSOD error 0x00000023 occurs due to missing of FAT file, virus present in your system, hardware is unable to communicate with BIOS request, wrong entries in windows registry settings, unfinished installation of windows.

What are the symptoms?

“STOP 0x00000023 (Parameter1, Parameter2, Parameter3, Parameter4) FAT_FILE_SYSTEM”
or
“STOP – 0x00000023 FAT_FILE_SYSTEM fastfat.sys” you receive this error message in your PC screen.
Due to this error you are unable to install any system programs, system gets freezing, slow PC boot, hardware failure.

How to fix BSOD error 0x00000023?

 If you are facing windows BSODF error no need to worry you can easily fix your PC by following given below instructions:-

1. Be sure that there are no files system issues by running chkdsk command.
2. You should have proper updates of windows.
3.  You should also have proper updates of antivirus that you have installed to prevent your system from dangerous virus.
4. Windows registry plays very important role in your system if any of the file gets missing from windows registry keys then you have to face many system problems.  So, it is very much necessary to fix windows registry files.
5. You should also keep your system with proper maintenance by deleting or removing pirate bay from your system.
6. You should stop downloading pirate bay from internet.
7.   If this error has badly affected your system then you have to uninstall your windows operating system and reinstall it again.

To fix this BSOD error by using manual steps is quite tough work but you can fix it easily by using third party repair tool. I have fix my PC by keeping in mind above instructions and now its your turn to fix this BSOD error 0x00000023 from your system. Third party repair tool is the best software through which you can easily remove or fix windows BSOD error without any tension.

Fix windows update error 0x80244015

Windows error problem has become common problems for windows users. You might have observed that while working in your system and when try to update windows then you are encountered with an error message “0×80244015 WU_E_PT_REFRESH_CACHE_REQUIRED.Server replied with Invalid Cookie or Server Changed. Caller should refresh its internal state then repeat the call to Protocol Talker” in your Pc screen. Windows update error 0x80244015 reports that a window is unable to install updates. This error can damage your system files. You need to fix this error immediately otherwise it can damage your system. If you are running any of the programs and suddenly this error occurs then you should turn off downloading or updating programs.

Cause for windows update error 0x80244015.

• There are various reasons due to which windows update error 0x80244015 such as:-
• You just shut down your system without quitting system programs.
• Incomplete updates of windows as well as system files.
• Software that you have installed may be outdated.

What are the symptoms?

 When you try to update windows then you receive this given below error message
“0×80244015 WU_E_PT_REFRESH_CACHE_REQUIRED.
Server replied with Invalid Cookie or Server Changed. 
Caller should refresh its internal state then repeat the call to Protocol Talker”
If this error occurs in your system then you have to face issues like windows is unable to update, automatic system restarts, system start up problems, unable to run or execute system programs properly.

Solutions to fix windows update error 0x80244015.

If you have still not started to work on how to fix windows update error then immediately start working on it to overcome from this windows update error 0x80244015 and to do this follow the given below steps:-

• When this error occurs then restart your computer and connect to the network and try checking for updates again.
• Click on start button and type Update in the search box and press enter.
• Then from the lists of results click windows update.
• You receive updates: Managed by your system administrator option at the bottom of the page, if your system is managed by WSUS.

If this above steps doesn’t work then you can try connecting directly to the Microsoft update website and then do the following given below steps:-

• Click on start button and type update in the search box and press enter.
• When the lists appear then select and click on windows update.
• Then click Check online for updates from Microsoft Update and follow the on screen instructions to fix this window update error 0x80244015.  I can fix my PC easily by following given above steps.

If you are unable to follow given above steps then you can use third party repair tool to fix windows update error 0x80244015.

How to windows error 0x000000be?

Windows error has become common problem for system users. While working on system when you try to open a program or an application then might have received an error message
"0x000000BE ATTEMPTED_WRITE_TO_READONLY_MEMORY" on your Windows screen. This error occurs when you try to run system programs. This issue occurs due to the improper maintenance of windows registry settings or directly you can say improper maintenance of your computer.  Error 0x000000be is BSOD error which displayed when windows has to shut down because of a kernel problem which has to prevent from further damage of your computer. When you work overtime in your system then sometimes you receive this error and resulting in total system corruption. This error affect similarly in all the versions of windows operating system.

Why this error occurs?

• This error occurs due to missing of some file from windows registry.
• Virus present in your system can damage your system files.
•  Incomplete updates of windows.
• This error occurs when windows does not correctly synchronize memory protection which changes when the system writes registry files. 

 What are the symptoms?

“0x000000BE ATTEMPTED_WRITE_TO_READONLY_MEMORY"
This error can damage your system as well as installed windows operating system, slow performance of your system, hang up problems.

 How to windows error 0x000000be?

If you are one of the victims of this error then you can find here solutions to fix this error.

• Click on start button and type regedit in the run command box.
• Search and click the following registry subkey:
• HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager\
• Right click on Protected Storage in the details pane and then click Modify option.
• You should note that Protected Storage didn’t exit you have to create it and to create follow the given below steps:-
• In the Edit menu, point to New option and then click DWORD Value.
• Then Type Protected Storage and then hit enter.
• On the Mail box, click Decimal and type 0 in the Value data box and then click ok.
• Close registry Editor.
• Then restart your computer to get the changes in your system.

If you are unable to follow these given above manual steps and if this problem occurs again even after following given above steps then you can use third party repair tool which will help you to remove windows error 0x000000be easily.I have tried to fix my PC by following given steps and now it’s your turn.

Easy way to fix windows error 0x000000c1.

While working on your system and when you try to install any other device like scanner, printer, keyboard in your system then you might have faced windows error ” ***STOP: 0x000000C1 (0x9944efd0, 0x00000000, 0x00000030, 0x000000022}
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION (c1)” on your PC screen and due to this error you are unable to install any device to your system. Error 0x000000c1 reports that you are unable to install any kind of devices in your system. This error occurs in all the versions of windows operating system. Main reason for occurrence of this error is due to the missing of file or the driver gets missing from your system.  But you receive this error generally in windows 7 and it may be caused when windows system files get damaged.

Why this error occurs?

• An incomplete installation of the software
• When you try to uninstall any program form your system then incomplete uninstalls can create this issue.
• Improper deletion of application or hardware.
• Shut down of the system without quitting programs.
• Shut down of the system without completing windows update process.
• When your installed antivirus is not properly updates can occur this issue because if you don’t update antivirus then you system is fully infected by virus.
• Junk files present in your system.

What are the symptoms?

 When you try to install devices in your system then you might have received this error message ” ***STOP: 0x000000C1 (0x9944efd0, 0x00000000, 0x00000030, 0x000000022} 
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION (c1).”
Due to this error your system performance gets slower down and you are strictly unable to connect your devices in your computer.

 How to fix windows error 0x000000c1?

I was also facing this same error in my system but now I can fix my PC by following given below steps. You can easily solve this error by watching given below instructions.

1. First of all you should keep proper maintenance of your system.
2.  You very well know that windows registry plays very important role in your system if any of the file get corrupted or missed due to some issue then you have to have this type of problems as well as other system problems. So you need to keep maintain your windows registry properly.
3. Proper updates of your security essentials are very much necessary.
4. When you are updating windows then complete your updates and then close your system.

Manual steps to fix this error are quite tough but you can easily overcome from this issue by using third party repair tool. Don’t think start working to remove this error from your system.

How to fix windows error message “Stop error code 0x0000000A (IRQL_NOT_LESS_OR_EQUAL)” in windows XP?

When you try to install operating system in your computer then you might have received an error message Stop error code 0x0000000A (IRQL_NOT_LESS_OR_EQUAL) and unable to install OS in your system. Error code 0x0000000A reports occurs during installation of windows OS in your system and this error reports that there is a problem with the hardware components installed in your system.

Why this error occurs?

This error occurs due to improper mainatnce of your system, driver uses incorrect memory address, hardware issues and corrupt software.

What are the symptoms?

Stop: 0x0000000A (parameter1, parameter2, parameter3, parameter4)
IRQL_NOT_LESS_OR_EQUAL
*** Address x has base at x – filename error message while installing windows OS your system and you are unable to install it.

How to fix windows error message “Stop error code 0x0000000A (IRQL_NOT_LESS_OR_EQUAL)” in windows XP?

Use the manual steps to fix windows error:-

• During the installation process, press F% function key when you are prompted with “Setup is inspecting your computer's hardware configuration" message in your screen.
• When new page appears then you should specify the correct computer type and Hardware Abstraction Layer (HAL). 
• Then try to re-install windows XP.
• If you resolve this error message successfully by following given above steps then install windows XP successfully and if condition not solved then try the next method:-

Use windows installation CD to fix this error message:-

• You need to first disable antivirus software and BIOS antivirus protection.
• Then insert the windows XP installation CD in your CD/DVD drive and then restart your computer.
• When you receive a message ‘Press any key to boot from CD then you press a key and now your computer start with Windows XP CD
• When your computer starts from the CD then you receive a message and you need to select  any one of the following options:-
• To set up Windows XP now, press ENTER.
• To repair a Windows XP installation using Recovery Console, press R.
• To exit Setup without installing Windows XP, press F3.
• And hit enter.
• Press on F* function key to accept the Licensing Agreement.
• Lists will appear and then computer ask you to select one of the following options:-
• To repair the selected Windows XP installation, press R.
• To continue installing a fresh copy of Windows XP without repairing, press ESC.
• After you repair windows XP press R key.
• This method can resolve your windows XP problems.
• You can also use third party repair tool to fix your PC.  Now I can fix my PC by following above given instructions and now it’s your turn to fix this error.

How to fix outlook error message “ 0x800CCC60 SMTP_RESPONSE_ERROR Invalid response”?

Ms Outlook allow you to send or receive email messages and  also perform many other applications but sometimes it happens that when you try to send or receive emails form outlook then you might have received an error message and unable to send email messages.  Outlook error 0x800CCC60 occurs due to incorrect POP settings. This outlook error is not very common for outlook users it appears very rare.  Due to this error you are strictly prevented from sending or receiving email messages. This error can damage you pst file. It is very much necessary to solve outlook problems because this outlook error can affect your installed Ms Outlook in your system.

Why outlook error 0x800CCC60 occurs?

 Outlook error 0x800CCC60 occurs due when the connection between the server and the outlook gets failed this problem can damage your pst file,  slow internet connection, if your system if fully affected by virus then you get this kind of error,  incorrect POP settings, problem in firewall blocking ports.

What are the symptoms?

“0x800CCC60 SMTP_RESPONSE_ERROR Invalid response”

 When you try to send or receive email messages then you might have received this error on your windows screen. This error reports that you are unable to perform outlook applications. Due to this error your pst file gets damaged, your email message may get corrupt while sending or receiving.

How to fix outlook error message “0x800CCC60 SMTP_RESPONSE_ERROR Invalid response”?

 I have also received this same error but now I can fix my PC by following given below steps:-
Start outlook.

•  Then go to the tools and click options.
• Click on Mail Set up and then click Email Accounts.
• Then you need to double click the email account and then click on more settings option.
•  As the new page opens click and select the advanced tab.
• When the Internet Email Settings page appears then change the outgoing server (SMPT) to 587 and click ok.
•  Now you login your outlook profile and then try to send email messages.

Sometimes manual instructions are unable to solve this issue but there is one more easiest and automatic way to solve this error. To overcome from this situation you can use third party repair tool to fix this outlook error 0x800CCC60.  Now you should try to fix this outlook error 0x800CCC60.

How to fix error message “The application failed to initialize properly (0xc0000135)”?

What is windows error 0xc0000135?

When you try to run or execute any system applications then you might have faced this error message “The application failed to initialize properly (0xc0000135)” in your windows screen and you are unable to open any application.
Or when you try to install certain programs in your computer then you receive this error. If there is a conflict between the third party programs installed on your computer this leads error to occur. This error prevents you from opening of executing system programs or an application.  This error occurs when your system have some important file missing. This error can have serious bad effect you’re your system if you don’t try to fix it as soon as possible.

What makes this error to occur?

• Due to improper mainatnce of system
• Missing of important file from your windows registry
• Virus present in your system makes this error to occur.
•  The application which you want to install may be corrupt.
•  The application that you have installed in you your computer may be outdated.

 What are the symptoms?

 When you try to install a program or an application then you might have received “The application failed to initialize properly (0xc0000135)” error message in your PC screen.

How to fix error message “The application failed to initialize properly (0xc0000135)”?

I can fix my PC by following given below steps:-

• To solve this issue you need to perform clean boot operation. This operation will help you to remove software conflicts from your system and to perform clean boot operation follow the steps:-
• Click on start button and type msconfig in the start search box and hit enter.
• If you are asked for an administrator password and confirmation, then type the password and click on continue option.
• Click on the Selective Startup, on the General tab.

• When the Selective startup page opens then from there, click to Clear the Load Startup Items check box.
• Click the Services tab and then select the Hide All Microsoft Services check box and then click Disable all option.
• Click ok.
• When you will receive a message then click restart option.
• After the system restarts you should check whether the issue has been solved or not.

It is very much necessary to fix application error 0xc0000135 immediately to prevent your computer form further damage. You can use third party repair tool to fix this error.

Fix error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME"

About "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME" error message.

Sometimes it happens that when you restart your computer then you might faced error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME" in your windows screen and unable to start windows. Windows error generally appears when there is improper maintenance of windows registry  files.  Windows registry is the most important part of the system which helps in performing all functions of windows application. This error occurs when system file gets corrupted or damaged, problem in input/output system BIOS settings, BIOS is unable to communicate with your system, virus is the main reason which creates to occur this type of issue. This error appears similarly in all the version of windows operating system such as Windows Vista, Windows XP, Windows 7 and Windows 8. If you receive this error continuously while performing system applications then need to fix it soon otherwise your computer will face many other problems.


What are the symptoms?

“STOP 0x000000ED (0xaaaaaaaa,0xbbbbbbbb,0xcccccccc,0xdddddddd) UNMOUNTABLE_BOOT_VOLUME”
or
"STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME" Error. 
Due to this error you get windows starting problem, system takes longer time to start up and shut down windows, system gets slower down, system crashes, blue screen of death appears while running PC.

How to fix error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME"?
 

• If this issue is occurred due to damage of system file then you need to repair the volume.

1. And to repair volume you can use chkdsk/r command. Make sure that when you this command then you may lose some data.
2. You need the windows installation disk.
3. Insert the windows installation disk in your CD/DVD drive and then restart your computer.
4. When windows start to appear then press R key to start the Recovery console.
5. .If you have a dual-boot or multiple-boot computer then select the installation which must access from the Recovery Console.
6. Type the password when you are prompted and hit enter.
7. In the command prompt, type the chkdsk/r command and press enter.
8. Again in the command prompt, type exit  and press enter to restart your system.

• If you are unable to solve this issue by following above method then you need to check the IDE cable and load fail save settings.

1. If your system using UDMA hard disk controller then follows the steps:-
2. Replace the 40-wire UDMA cable with cable with an 80-wire cable if your UDMA hard disk is connected to the controller 40-wire UDMA cable.
3. Load the 'Fail-Safe' default settings in the BIOS setting for your system and reactivate the frequently used options.

You can use third party repair tool to fix this error. If you have still not started working on to fix this error then start to fix my PC because this error can damage your computer.

How to fix runtime error 1512?

While working on your system you might have faced certain runtime error problems. Runtime error can damage your system files or creates bad effect on your system. Runtime error 1512 is one them. Runtime error 1512 is the error which occurs due to the missing of dll file form your system. Runtime error 1512 reports that you are unable to run system programs or an application. If  you avoid fixing this error then you  it will further damage our system programs so, fixig of this runtime error is very much necessary.

What makes runtime error 1512 to occur?

Runtime error 1512 occurs due to missing of dll file from your system, improper maintenance of windows registry files, software outdated, presence of junk files, improper updates of windows, improper shut down of your system.

What are the symptoms?

'Error 1512 Invalid report path/name. Must call set path and set report name first' This error occurs when generating report in FRx Designer.
Or 
Receive error 1512 – No transaction details for this reporting unit occurs when drilling down to the transaction level of a summary unit of a report that was saved in Drill Down Viewer to a new file name.

How to fix runtime error 1512?

You can easily fix runtime error 1512 by following given below steps:-

1. You should keep proper updates of windows. 
2.  You know that windows registry plays very important role in our system if any file from it gets damage then you face this type of error in our system so, it’s very much necessary to keep proper maintenance of windows registry files.
3. We should look after the proper updates of antivirus that you have installed in your system to protect your system form virus attack.
4. Check for the file which creates these issues and then uninstall it and re-install it again.
5. You can also reboot your computer and check the error has been removed or not.

• If the error still remains then click on start button and type regsvr32 in search box and press enter.
• When you get the new regsvr32 page then install and locate it to its right place.
• Then restart your computer and get the changes.

You can also use third party repair tool to fix runtime error which is the most automatic way to fix runtime error 1512. If you have not still started working on how to remove this error then start working about how to fix my PC and get free from runtime error 1512.

How to fix windows update error code 646?

What is windows error code 646?

 When you try to update windows then you might have received an error message code 646 on your windows screen and unable to update windows. Windows update has become very common problem for system users.  Windows update error generally occurs due to improper maintenance of your system. It generally happens that we try to tease windows registry files even after not knowing it properly. Windows error code 464 is also called 0x80070646 which is generated by Windows Installer. This error occurs due to the incorrect value in present in windows registry. We generally avoid this error but if we keep avoiding it then it can damage your system files as well as your installed operating system. You will observe this error affects similarly in all versions of Ms Windows. We should try to fix this windows update problem.

Why this error occurs?

 This error occurs due to missing of some important files from windows registry keys, when your system is fully infected by virus then you receive this kind of error message, incomplete updates of windows, software that you have installed that may be outdated.

What are the symptoms?

Error Code: 0x80070646 or
Error Code: 646 
or
 Error 1606 Could not access network location %APPDATA%” you receive this error message when you try to update windows.
or
Windows update error code 646 reports that you are unable update windows and you may face many several system problems.

How to fix windows error code 646?

 I can fix my PC by following given below steps:-
To fix this error we need to verify the value of the AppData key which is present in the windows registry and to work on this operation follow the steps:-

• Click on start button and type regedit in the start search box and press enter.
• When the program list will appear, then right click regedit.exe and from there click Run as Administrator and then click on continue option.
• Navigate and click on the following registry subkey:
• HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders and in condition if the value is not set to %USERPROFILE%\AppData\Roaming  then right click AppData from the details pane and then click on Modify option.
• In the Value data box enter %USERPROFILE%\AppData\Roaming  and then click ok.
• Then close registry editor and try to update again.
• If you receive again this error after following given above steps then repeat the above same steps instead use the following  registry subkeys HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders and repeat the same steps.

You can also use third party repair tool to fix windows update error code 646.

Fix Svchost.exe application error.

What is Svchost.exe application error in windows?

You might have seen while working in computer that windows operating system runs an automatic updates and receives an error message “The instruction at "0x745f2780" reference memory at "0x00000000". The memory could not be read”. Due to this error system hangs up or automatic restart your computer.

Why this error occurs?

 This error generate when your system is fully affected by virus, incomplete updates of windows, automatic updates of windows, improper maintenance of windows registry files.

What are the symptoms?

Windows have automatic updates while working on your system then you receive an error message “The instruction at "0x745f2780" reference memory at "0x00000000" in the svchost.exe - Application Error dialog box.
Due to this error message you system automatic restarts, hang up problems.

How to fix error message “The instruction at "0x745f2780" reference memory at "0x00000000" ?

I can fix my PC by following given below steps:-

• Open the svchost.exe – Application Error dialog box and then follow the given below steps:-

1. Click on start button and type services.msc in the run command box and then press enter.
2. Locate and double click on Automatic update which appears in the details pane.
3. Then click on the Log On option.
4. You have to be sure that the Local System account option is selected and Allow service to interact with desktop check box is clear.
5. Then click on the general tab and be sure that the Automatic option is selected in the startup list.
6. Click on start to start the service under service status and if it is already running then live it.
7. Again repeat the second step by using sixth step for Background Intelligent Transfer Service (BITS).

• Now you should reregister windows update comments and to do this follow the given below steps:-

1. Click on start button and type REGSVR32 WUAPI.DLL and then hit enter.
2. If you are prompted with "DllRegisterServer in WUAPI.DLL succeeded" message then click ok.

REGSVR32 WUAUENG.DLL
REGSVR32 WUAUENG1.DLL
REGSVR32 ATL.DLL
REGSVR32 WUCLTUI.DLL
REGSVR32 WUPS.DLL
REGSVR32 WUPS2.DLL
REGSVR32 WUWEB, in the open box type all the following commands one by one and hit enter after each command.

• You can also use this manual steps to fix this error:-

1.  Form your desktop double click on My computer and then click Properties.
2.  Click on Automatic Updates tab form the System properties dialog box.
3. Then click on Turn of Automatic Updates and then click ok.
4.  Then restart your computer.
5. When windows screen appears after restart then use the Windows Update Web site to install updates manually.
6. Then turn on automatic updates, after you install the updates manually.

You can also use third party repair tool to fix Svchost.exe application error.

How to fix Msstdfmt.dll error?

What is Msstdfmt.dll error?

 When you try to start or run program then you might have received an error message “Class not registered. You need the following file to be installed on your machine: MSSTDFMT.DLL” and you are unable to run system programs. This error generally appears while working or installing certain programs in your system. Msstdfmt.dll error occurs due to the missing of Msstdfmt.dll file. This error occurs when Msstdfmt.dll file get accidently deleted or corrupted due to some issue.  You also receive this error when you try to run 2G truncation utility. If this error appears continuously on your system screen then further you have to face many system problems.

 Why this error occurs?

 This error occurs due to missing of Msstdfmt.dll file, the software which you want to run is outdated, incomplete installation of software, shut down of system without completing updates, virus is the main reason for occurring this type of error these are the main reasons due to which Msstdfmt.dll error occurs in your system and badly effect your system.

What are the symptoms?

Run-time Error '713': Class not Registered. You need the following file to be installed on your machine. MSSTDFMT.DLL while executing program in your system you might have receive this error message.

How to fix Msstdfmt.dll error message?

If you receive this error message while running 2G truncation utility then use these given below steps to fix it:-

• If you are using windows 98, windows ME then try these given below steps:
• Search for the file MSstdfmt.dll file in your computer.
• Once you get this file then copy it to C:\Windows\System folder.
• Then click on start button and type cmd in the run command box.
• And in the command prompt type REGSVR32 C:\Windows\System\MSSTDFMT.DLL and press enter.
• Then follow the on screen instructions and then restart your system to get the changes.

If you are using Windows 2000, windows XP then try these given below steps:-

• Do the same thing as above but have some location changes in this.
• Search for the file MSstdfmt.dll file in your computer.
• Once you get this file then copy it to C:\<windir>\System32 folder.
• Then click on start button and type cmd in the run command box.
• And in the command prompt type REGSVR32 C:\windir\System32\MSSTDFMT.DLL and hit enter.
• Then follow the on screen instructions and then restart your system to get the changes.

If you are unable to troubleshoot this error Msstdfmt.dll error then you can use third party repair tool to fix it. If you have this issue and still not think how to fix it then think immediately to fix my PC by following above given steps.

How to fix problems which occur in windows after installing new software?

How to fix problems which occur in windows after installing new software?

Computer users install many different software to run their desired software. But sometimes it happens that when you try to open your installed software in your computer then you are unable to open it and receives strange error messages on your system screen. This problem occurs in all versions of Microsoft windows.

Why this problem occurs?

This problem occurs due to several reasons such as the software that you have installed in your system may be outdated, presence of virus in your system can damage your installed software, incomplete installation of software or incomplete download of software from internet.http://fixwindowserror.com/download-regcure-pro

How to fix problems which occur in windows after installing new software?

1. You need to uninstall the software and again re-install it.
2. You should have proper updates of windows that you have installed in your system.
3. You can use Last Known Good Configuration feature. Use this feature to restore your registry files and drivers to that previous information.

But make sure that any changes that were made to your system after using this last known configuration data will be lost.

• If you have recently installed software and having a problem then this feature will work for you.
• Follow the steps to use Last Known Good Configuration feature and to do this restart your computer.
• As the windows screen is going to appear, press F* function key to see the Windows Advanced Option screen.
• Locate the option select Last Known Good Configuration (your most recent settings that worked and hit enter.
• If this feature works then your system is restored to a good working state.

You can also use third party repair tool overcome from this problem. If you avoid this problem then it will create critical problem in your system then think earlier to fix my PC.